Creation CC
Classic Metal Ceramic
Creation CC
Technically ingenious, inspired by nature
Metal-ceramics in perfection: Creation CC is a high-fusing metal-ceramic with outstanding optical and physical properties that has always kept pace with increasing aesthetic demands - acclaimed and proven worldwide for more than 30 years!
The perfectly matched ceramic materials feature excellent homogeneity and high flexural strength. The consequence: a densely sintered structure for pure and pore-free layers with maximum reliability. The pure potash feldspar with a microfine leucite crystal structure creates iridescent light refraction and natural brilliance, as well as enhancing strength. In addition, the special effect materials can also be used to create exceptional colour highlights.
The choice of modular kits offers the perfect start for all requirements. This classic brand lets you create metal-ceramic restorations with impressive aesthetics - dental artistry in perfection!
Creation CC – natural brilliance and efficiency.
THE BRILLIANCE OF CREATION CC:
- Unique, lifelike aesthetics owing to highly pure potash feldspar
- Highly resilient ceramic due to high flexural strength
- Natural colour effect and light dynamics due to leucite crystals
- Ease of handling thanks to a consistent colour and layering system
Creation CC is a metal-ceramic for veneering metal frameworks made of precious or non-precious metal alloys with a CTE of 13.8 - 14.9 (at 25° - 500°C). It has also proven to be highly effective in the fabrication of aesthetic ceramic veneers on refractory stumps or platinum foil.
* If NEM is processed without CreaAlloyBond, the first opaque firing should be done at 1000°C due to the poor heat conductivity of NEM. If using CreaAlloyBond on NEM this temperature increase is not necessary.
** The appearance of the bonder may vary according to the alloy composition.
The above firing parameters are guide values which must always be adapted to the furnace being used and the situation of the furnace. Getting the correct firing result is crucial here.
Other firing parameters for Dekema furnaces can be found here!
Materials which are not related to the Vita®shade guide:
Vita® is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Bad Säckingen, Germany.
The results of this mixing chart relate to defined samples produced in-house and the measuring instruments located there.
No responsibility is taken for the correctness of this information
Vita® is a registrated trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG, Bad Säckingen, Germany.
All tested materials conform to standard EN ISO 9693:2000. The technical and physical values given relate to samples produced in-house and the measuring instruments located there.
MANUALS
LEAFLETS & BROCHURES
FIRING & COLOUR TABLES
SAFETY DATA SHEETS
CREA ALLOY BOND – tension-free CTE balance
Crea Alloy Bond is a bonding agent which was specially developed for neutralising leaking metallic oxides. At the same time it acts as an efficient CTE buffer between porcelain and metal alloy.
Strong bonding – uncomplicated handling: Crea Alloy Bond is a ready-to-use paste material which, with a bonding strength of approx. 70 MPa, provides a secure bond between porcelain and metal alloy. Owing to its excellent physical properties, Crea Alloy Bond achieves a buffer effect. Thus the bonding agent prevents the dispersion of staining metallic oxides and forms a micro-fine neutral layer between metal alloy and porcelain. As a result, it balances out the different coefficients of thermal expansion between metal and porcelain, especially with non-precious metal alloys.The porcelain bonder is also optically convincing: After firing it has a golden yellow appearance – an aesthetically perfect background for high and stable colour reliability!
Crea Alloy Bond – buffer zone between metal and porcelain.
THE BRILLIANCE OF CREA ALLOY BOND:
- Efficient CTE buffer between porcelain and metal alloy
- Safety owing to high flexural strength (70 MPa)
- No marginal discolorations – staining metallic oxides are neutralised
- Greater colour reliability because of the golden yellow undertone
- Compatible with all materials from Creation CC and LF
Crea Alloy Bond | 000080
MOISTURING FLUID – no more drying out when layering
Creation Moisturing Fluid is a mixing liquid that delays the drying out of ceramic layering. It is used as a moisture-retaining medium when veneering extensive restorations and complex corrective firings.
The chemical composition of the universal moisturising fluid has been adjusted for use with all Creation ceramic systems. The ceramic material applied to the framework does not dry out as quickly, becomes more plastic and can thus be applied in a more targeted manner - for more efficiency and precision when layering!
000090 | 25 ml
In Nova Neo Fluid
Mixing fluid for In Nova Neo.
001163 | 25 ml
Make up Neo Fluid
Mixing fluid for Make up Neo.
001125 | 25 ml
Make up Neo Reconditioner
For freshening up concentrated stains.
001126 | 8 ml
LIQUID FIRING PAD – dimensionally stable and secure
The liquid firing pad allows restorations of all kinds to be easily and safely fixed for firing in the furnace. The liquid material is applied to the inside of the crown and then placed on a firing tray with a refractory pin. The support material hardens fully during the firing process and stabilises the dental restoration during firing - also a more secure fixation for inlays, onlays, crowns and veneers.
Resistant yet easy to remove: after firing, the hardened paste can be removed quickly and without residue under running water using an instrument.
Liquid firing pad | 000081
Creation Brush Kit | 000136
The six different sizes of the first-class Kolinsky red sable brush with a heavy wooden holder perfectly meet all the requirements of layering techniques.
1 Brush Nr. I | 000131
2 Brush Nr. II | 000132
3 Brush Nr. III | 000133
4 Brush Nr. IV | 000134
5 Brush Nr. V | 000135
6 Brush Creapast Nr. VI | 000321
CreaPen Separating Pen | 000059
The double-ended ceramic insulation pen with one pointed and one broad nib for surfaces or grooves respectively is simply applied to the sealed stump.
Please wait while we are loading products.